Date : 9/2/2021 5:33:59 AM
From : "eladc"
To : "Vogel, Sven C" , "Tiferet Eitan" , "asafps"
Cc : "Rafailov Gennady"
Subject : Re: steel samples


Thank you.

From: Vogel, Sven C <sven@lanl.gov>
Sent: Thursday, September 2, 2021 8:24:53 AM
To: eladc; Tiferet Eitan; asafps
Cc: Rafailov Gennady
Subject: Re: steel samples
 


but of course - here is the data. smartsaddrun can add them to a single one of superb statistics.


From: eladc <eladc@iaec.gov.il>
Sent: Wednesday, September 1, 2021 10:43 PM
To: Vogel, Sven C; Tiferet Eitan; asafps
Cc: Rafailov Gennady
Subject: [EXTERNAL] Re: steel samples
 
Thanks for clarifying. Could you please send fullrings too?
From: Vogel, Sven C <sven@lanl.gov>
Sent: Wednesday, September 1, 2021 9:19:43 PM
To: eladc; Tiferet Eitan; asafps
Cc: Rafailov Gennady
Subject: Re: steel samples
 

only texture, 3MB/file. full rings are 300KB or so. Seconds line in each file says what IPARM file was used for binning.



From: eladc <eladc@iaec.gov.il>
Sent: Wednesday, September 1, 2021 11:31 AM
To: Vogel, Sven C; Tiferet Eitan; asafps
Cc: Rafailov Gennady
Subject: [EXTERNAL] Re: steel samples
 

Sven,

Thank you for the SLM_HT-East run.

Did you send me the fullrings only or also the texture files? I think only fullrings, no?

El'ad


From: Vogel, Sven C <sven@lanl.gov>
Sent: Tuesday, August 31, 2021 8:36 AM
To: eladc; Tiferet Eitan; asafps
Subject: Re: steel samples
 

here's the SLM-HT East sample that El'ad mounted. And the first of the steel samples, the others should run when beam comes back tomorrow at 8 am, but maybe Asaf or Gennadi are really curious...


Let me now if you get data in less than 10 days after shipping from any other neutron facility. 😊


Is there much point in scanning the steel samples in 2mm slices along the BD? If so - any of the 9 preferred? I run the slit tomorrow...


Sven



From: eladc <eladc@iaec.gov.il>
Sent: Wednesday, August 25, 2021 11:36 PM
To: Vogel, Sven C; Tiferet Eitan; asafps
Subject: [EXTERNAL] Re: steel samples
 

It is not good. It is incredible. Thanks!

From: Vogel, Sven C <sven@lanl.gov>
Sent: Thursday, August 26, 2021 12:10:15 AM
To: eladc; Tiferet Eitan; asafps
Subject: Re: steel samples
 

will do - robot delayed to FRI or SAT since I need to get some calibration runs for my PDF molten salt stuff done before I remove the furnace. <10 days between receipt and data is still good turn around...



From: eladc <eladc@iaec.gov.il>
Sent: Wednesday, August 25, 2021 10:22 AM
To: Vogel, Sven C; Tiferet Eitan; asafps
Subject: [EXTERNAL] Re: steel samples
 

Sven,

Did you squeeze in my SLM-HT sample too?

El'ad

From: Vogel, Sven C <sven@lanl.gov>
Sent: Wednesday, August 25, 2021 5:06:49 PM
To: eladc; Tiferet Eitan; asafps
Subject: steel samples
 

Hi guys,


got the 9 steel samples, they are mounted and should run today.


Sven