Dear IboVery well.Your attendance is very important.Let me suggest few tentative dates.I am sure we will eventually find an appropriate date.ThanksEitanבתאריך יום ב׳, 28 בינו׳ 2019, 19:28, מאת Matthews, Ibo <matthews11@llnl.gov>:Eitan,
I think Israel could work. It’s a higher barrier for me because of my already heavy travel schedule, but I can send capable folks from my group if I can’t make it out. But, I may be able to make it if you specifically see value in me personally being there. (I’d very much like to!)
Ibo
From: Tiferet Eitan <tiferete@gmail.com>
Sent: Sunday, January 27, 2019 11:30 PM
To: Matthews, Ibo <matthews11@llnl.gov>
Subject: Re: Ti build
Thanks Ibo
I just wanted to verify that the files arrived.
I will also keep you posted regarding the workshop, do you think it is doable to plan it in Israel?
Best
Eitan
Eitan Tiferet, Ph.D.
Senior Research Scientist
Materials Department, NRCN
Additive Manufacturing R&D Center, Head
Rotem Industries Ltd.
בתאריך יום ב׳, 28 בינו׳ 2019 ב-7:54 מאת Matthews, Ibo <matthews11@llnl.gov>:
Hi Eitan,
Yes I did, sorry for not responding. It was late on Friday as I gathered up files to send our shop. Hopefully we’ll be able to put this in our next build. I’ll definitely keep you posted.
Any new news on the joint workshop?
Ibo
From: Tiferet Eitan <tiferete@gmail.com>
Sent: Sunday, January 27, 2019 1:45 AM
To: Matthews, Ibo <matthews11@llnl.gov>
Subject: Fwd: Ti build
Dear Ibo
Did you get my last mail?
Thanks
Eitan
---------- הודעה שהועברה ----------
מאת: "Tiferet Eitan" <tiferete@gmail.com>
תאריך: 25 בינו׳ 2019 16:05
נושא: Re: Ti build
אל: "Matthews, Ibo" <matthews11@llnl.gov>
עותק:
Dear Ibo
Panama was indeed a very nice and fruitful conference.
I am not sure if you want the same STL as our last built or a new one just for comparison.
So please choose, there are 3 pairs of files.
First one is the copy of our last built, second is some poles we printed in EBM and measured in LANL in neutron diffraction under compression. Third is just a standard STL but I am sure you have plenty of that kind or similar.
Thanks
Eitan Eitan Tiferet, Ph.D.
Senior Research Scientist
Materials Department, NRCN
Additive Manufacturing R&D Center, Head
Rotem Industries Ltd.
בתאריך יום ו׳, 25 בינו׳ 2019 ב-3:43 מאת Matthews, Ibo <matthews11@llnl.gov>:
Hello Eitan,
Great to see you in Panama! I enjoyed our conversation. I’m sorry for the late notice, but there’s time on our machines on Monday and I would like to put a nice comparison build for Ti for our collaboration. Do you have an STL file you can send me for a good comparison? Ideally I would send them files tomorrow but anytime before Monday would work.
Thanks,
Ibo
Manyalibo J. Matthews, Ph.D.
Laser Materials Interaction Science Group Leader
Lawrence Livermore National Laboratory
7000 East Avenue, L-470, Livermore CA 94550
ibo@llnl.gov; 925-424-6762(o); 925-344-9045(m)